Custom Plastic Injection molding

Custom Plastic Injection molding Injection molding is a major part of the plastics manufacturing industry and is a big business worldwide, consuming approximately 32 wt% of all plastics. It is in second place to extrusion, which consumes approximately 36 %. the United States alone there are about 80,000 IMMs from plastic manufacturers and about 18,000 …

Continue reading ‘Custom Plastic Injection molding’ »

plastic mold manufacturers

plastic mold manufacturers When to Use Hot Runner Systems Hot runner (runnerless) systems are seeing more demand in today’s high-speed, high-volume molding operations due to higher material prices, a need to reduce cycle time, reduce scrap rates, and increase overall productivity and costs to manufacture, as compared to a “cold runner” system. Particularly in applications …

Continue reading ‘plastic mold manufacturers’ »

thermoplastics Compounds

thermoplastics Compounds Compounds for thermoplastics are usually much simpler but utilize many of the same ingredients that are listed in the Rubber World Blue Book. In addition, mixing machinery for both rubber and plastic compounds are very similar in construction and operation. The following discussion applies to thermoplastics in particular. Antioxidants and stabilizers are chemicals …

Continue reading ‘thermoplastics Compounds’ »

Mold Mounting,Strength,Cooling of EPS mold

Mold Mounting,Strength,Cooling of EPS mold   Mounting of Chests Chests must be constructed so that they can be mounted to a specific machine. The mounting method must take into consideration their expansion and contraction, and still allow them to remain in a reasonably stable location. It is always desirable to insulate the chests from the …

Continue reading ‘Mold Mounting,Strength,Cooling of EPS mold’ »